Shopping cart

There are no products in your shopping cart.

View Cart Checkout

0 Items Total: $0.00

JD55-PR Dual Wall Rural Kit//OVERVIEW

Price: $770.00 SKU: JD55-PRDWRK-G

This kit was specifically designed for customers who are located in weak reception areas. With the use of a pre-amp that is placed inline with the donor antenna and the base repeater, the signals are amplified and filtered to provide you the level you once thought was not possible. The system is pre-set to ensure seamless integration with the cellular network.

A certified test report is included with each repeater that leaves our factory, so you are assured of strict quality controls.

  • Unlimited Call Capacity
  • 70dB+ Gain (W/Preamp) / 10dBm Output Power
  • With Pre-Amp for Rural Location
  • FCC Approved. ID: SQXJD55-PR
  • FCC Approved for AWS ID: SQXJD55-PR8-AWS
  • Industry Canada Approved. ID: 5607A-55PR8AWS
  • CE Approved
  • 18 Months Warranty
  • 30 Day Money Back Satisfaction Guarantee
  • MUTE - Auto Shut Down if oscillation is detected
  • Adaptable Coverage Area (3000 Sq ft +)
  • Dual Band Models Available
  • Manual Gain Control Feature (Tx & Rx)
  • Alarm LED's for Error Detection
  • Attractive modern design
  • Wide range of frequencies available
  • Supports 90-265 Volts / 50-60Hz
  • Small size, light weight
  • NEW - Now Available in Off White
  • Supports Any Cellular Device (Voice & Data)
  • Free! - Phone Tech Support
  • Sold as a complete kit. Plug & Play!
  • Easy to Install
  • Optional Pre-cut coax Lengths Available
  • Includes Pre-Amp for Additional Boost
30 Day Money Back Guarantee 18 Months Warranty

Please select a megahertz range for this product

Sub-Total: $770.00

ADDITIONAL PRODUCT//INFORMATION

Features Technical Specifications

The JD55-PR Indoor Cellular Repeater Kit with Pre-Amp is supplied with all of the components needed to provide coverage for rural applications where outdoor reception is weak. At its heart is our feature-filled JD55-PR Full Duplex Repeater.

The Kit Includes:

Yagi Panel Donor Antenna
45ft Low-Loss Coax (5D-FB)
WCB Pre-Amplifier with Power Supply & Signal lead
JD55-PR Repeater & Power Supply
SMA x SMA Male RF Adapter
2-Way Signal Splitter (SMA)
35ft Coax SMA Male / SMA Male - 5D-FB (2)
Wall Mount Panel Antenna (2)
Coax Seal
User Manual
Warranty Card

To maintain safe and specific output signal levels, this advanced repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater within a 15dB range depending on environmental conditions. In addition, it also has built-in attenuation dip switches that allow you to manually attenuate (fine tune) the repeater's uplink and downlink channels in 1db steps up to 31dB, using color changing LED's as a status indicator.

These Alarm LED's are used as a guide to prevent your installation from re-producing errors due to excessive input signal strength if a pre-amp is used, or from signal oscillation due to the indoor antenna and outdoor antenna being too close to each other, which can have adverse effects on a base station.

A Network Safe / MUTE Feature has also been added to this repeater to protect the cellular network. In short, the repeater will stop transmitting if any errors or signal oscillation is detected within 2 sec of detection. It will cycle for 30 sec then attempt to transmit again. If no adjustment in gain has been made to correct the error within the 30sec MUTE cycle, the system will again shut down after 2 sec. It will run this sequence for a total of 3 times and then shut down completely. Unplugging and powering back up the unit will reset this sequence.

 

Frequency Chart

Model Uplink Downlink
JD55-PR850 CELL 824~849 MHz 869~894 MHz
JD55-PR900 GSM900 890~915 MHz 935~960 MHz
JD55-PR18 DCS 1710~1785 MHz 1805~1880 MHz
JD55-PR19 PCS 1850~1910 MHz 1930~1990 MHz
JD55-PR21 WCDMA 1920~1980 MHz 2110~2170 MHz
JD55-PR819 CELL/PCS 824~849 MHz 869~894 MHz
1850~1910 MHz 1930~1990 MHz
JD55-PR918 GSM900/DCS 890~915 MHz 935~960 MHz
1710~1785 MHz 1805~1880 MHz
JD55-PR921 GSM900/WCDMA 890~915 MHz 935~960 MHz
1920~1980 MHz 2110~2170 MHz
JD55-PR1721 AWS 1710~1755 MHz 2110~2155 MHz
JD55-PR8AWS CELL/AWS 824~849 MHz 869~894 MHz
1710~1755 MHz 2110~2155 MHz
JD55-PR8750C CELL/LTE 824~849 MHz 869~894 MHz
776~787 MHz 746~757 MHz
JD55-PR19-AWS PCS/AWS 1850~1910 MHz 1930~1990 MHz
1710~1755 MHz 2110~2155 MHz
 Filter Bandwidth GSM & CDMA 25MHz | PCS 60MHz AWS 45MHz | LTE 11Mhz
 Max total output power   ≥10dBm ≥10dBm
 Max. Gain ≥60dB ≥60dB
 Gain Flatness   CDMA & GSM: ≤5dB, PCS & DCS: ≤8dB AWS ≤6dB, LTE ≤3dB
 AGC Range ≥15dB - Auto shut off after 15dB (MUTE)
 Maximum Input Power   0dBm
 Gain Control Range(MGC) ≥15dB in step of 5dB by Dip Switch
 V.S.W.R ≤2
Intermodulation 9KHz~1GHz≤-36dBm 9KHz~1GHz≤-20dBm
1GHz~12.75GHz≤-30dBm 1GHz~12.75GHz≤-20dBm
Spurious Emission 9KHz~1GHz≤-36dBm
1GHz~12.75GHz≤-30dBm
Spurious Emission Mask Complies with 3GPP TS 25.106
Modulation Accuracy Complies with 3GPP TS 25.106
Peak Code Domain Error Complies with 3GPP TS 25.106
Frequency Stability ≤0.01ppm
 ACPR ≥30dB @±5MHz&±10MHz
Noise Figure (@ max gain)   ≤5dB
Group Delay ≤4.5 micro Sec
 Impedance   50Ω

Mechanical Chart

Power Supply Input 90- 264 VAC,50 Hz, transformer: 9V/3A
Cooling Heat Sink Convection Cooling
Power Consumption < 35W
Operating Temperature -10°~+50°C (14F ~ 122F)
 RF Connector SMA Female
Weather Proof IP40
 Dimension 183 x 128 x 46.3 (mm)
Weight < 1 kg / 2.2Lbs
LED Alarm Standard
Power LED Power Indicator
ALC LED Amber @ ALC 1~5dB, Red @ ALC 15-20dB
LED off after 5 seconds red color

RELATED//PRODUCTS

JD55-PR - Dual Ceiling Kit ~ Grey

Wireless coverage for locations 3000 sq ft. + (Dual or Single Band)

JD55-PR - Standard Kit ~ Grey

Wireless coverage for locations 2000 - 3000 sq ft. + (Dual or Single Band)

JD55-PR Rural Kit

For Applications Where Outdoor Reception is Very Weak

JD55-PR - Dual Ceiling Kit ~ White

Wireless coverage for locations 3000 sq ft. + (Dual or Single Band)

// See All Consumer Repeater Kits